There are several reasons why it would be wise to use an extension cord instead of plugging it into a wall outlet. One reason is that it allows you to adjust the distance between your plug and the appliance. As they can sometimes be quite difficult to access, this makes plugging in much easier, but the real question is can you really use an extension cord on a mini-fridge? this article addresses exactly that.
Can you plug a mini fridge into an extension cord?
Depending on the gauge of the extension cords, it is possible to plug a mini fridge into an extension cord. The rating for extension cords typically ranges from 2-15 amps, which is enough to power smaller kitchen appliances without much trouble. If your fridge has a 24-volt compressor motor and depending on its current draw rate, you might need a 20-amp or larger extension cord to accomplish this feat.
The thickness of an extension cord will have an effect on how well it can carry the current required by your refrigerator’s motor. Most brands are 1/2″ in diameter while others might measure 3/8″ thick. The thickness of the cord will also determine the amount of temperature loss through the cord.
A good question for you to ask is, what would happen if your refrigerator fell over while plugged into an extension cord that was too thin of a gauge for it? The short answer is that it could cause a fire. The refrigerator has some sort of thermal overload protection device built in to prevent it from overheating, but it won’t save you from home damage if something unexpected happens.
If you do plan to plug your fridge into an extension cord, make sure it’s a heavy enough gauge to support the current draw of your appliance and that you aren’t running it across any high traffic areas where someone could trip over the cord and pull it out of the wall socket. The last thing you want is for your refrigerator to fall over onto a stove or floor heater.
Some other considerations are that extra length may be required from the outlet, depending on how much clearance you have directly behind the refrigerator. Also, make sure that there is no chance of someone tripping over or pulling on the cord because it isn’t plugged in securely in the wall and your refrigerator falls over.
Can you use an extension cord with a mini-refrigerator?
It is possible to use an extension cord with a mini-refrigerator. It depends on the gauge of the extension cord. The thicker the gauge, the more current it can carry. You also need to consider the length of the extension cord. A 15 amp cord might be required if you have a high draw load and are trying to operate your refrigerator over a long distance from the outlet.
Do mini-fridges need to be plugged in?
They don’t need to be plugged in. When they are plugged into a power strip with a timer, the power strip will automatically turn off the power after a set period of time. If you want to turn the fridge off at night, just plug it in and let it run all through the night. A lot of people leave their mini-fridges running throughout the day because they are so warm that they aren’t cold enough to use. That way, they can use them as coolers for drinks and snacks when leaving them inside overnight.
Will an extension cord damage a mini-fridge?
If you are using the extension cord with a high enough amp rating for the load that your refrigerator will pull, then you shouldn’t have any issues with it damaging it. You do want to watch that you aren’t pulling more current through an extension cord than what it’s rated for, as this can cause overheating and serious damage to your appliance.
If your small refrigerator has a heavy-duty prong, you can probably use an extension cord. The question is: how long of an extension cord can you use? It depends on the size and thickness of the extension cord. An extension cord is rated according to its current and physical size. A small refrigerator might have a 20 amp breaker, so if it’s operating on a 220-volt circuit, that means that it pulls about 11 amps.
How long can you use an extension cord on a mini-fridge
You can use any extension cord as long as it’s rated for the power that is required by the appliance. You have to be careful when you are using an extension cord. Most of them come with a fuse so that you can protect yourself from damage to your home or appliances.
Why should You plug a mini-fridge into an extension cord?
There are several reasons why it would be wise to use an extension cord instead of plugging into a wall outlet. One reason is that it allows you to adjust the distance between your plug and the appliance. As they can sometimes be quite difficult to access, this makes plugging in much easier.
How can I use an extension cord with a mini-fridge?
To use an extension cord, you will need to make sure that the extension cord has been properly rated for the amperage load of your refrigerator. The next thing that you want to check is how much length is on the cord. If it is the right length, you can safely use it between your mini-fridge and the outlet. However, since these things are so small and delicate, you don’t want to overload them with too much power.
What kind of extension cord do you use with a mini-fridge?
To use any extension cord that has an electrical rating over 15 amps for an appliance that uses less than 15 amps is dangerous and could cause a fire. It is best to use the appropriate extension cord for the appliance. Extension cords are not designed with appliances in mind. They are designed for general use. So an extension cord that you would use on your home or in a small business, you can plug into an appliance, but it’s not designed for that purpose.